I&C Engineer

Oak Ridge, TN
Full Time
Experienced
Summary:
This role is responsible for supporting the design and development of instrumentation and controls (I&C) through all phases of the design lifecycle, including testing, analysis, and implementation of hardware according to the design requirements. The position also supports nuclear measurement activities, including Non-Destructive Assay (NDA) equipment and coordination with Material Control & Accounting (MC&A) for facility operations such as waste characterization, regulatory compliance, and manufacturing support.

Responsibilities:
  • I&C design for process systems (controls, instrumentation, data collection, electro-mechanical, automation & robotics, connectivity).
  • Work with system and mechanical engineers, designers, and analysts on development of detailed design.
  • Support mechanical engineers in developing process flow diagrams, and piping and instrumentation diagrams.
  • Interface with Architectural and Engineering firms, as needed, to support development/implementation of I&C system(s). 
  • Functional Requirement and procurement specifications for instrumentation and control systems.
  • Process instrumentation design, specification, and procurement oversight.
  • Control Systems for pumps, valves, heat exchangers, and more to improve the functionality of the client’s plant.
  • Develop control logic narratives, control logic diagrams, and control logic schematic diagrams.
  • Develop panel wiring and interconnect cabling diagrams.
  • Create or oversee the development of human machine interface (HMI) screens.
  • Develop specifications for Programmable Logic Control (PLC) or Distributed Control systems (DCS) and components and instrumentation. Develop control logic code and implementation on PLCs/DCS.
  • Author I&C system hardware descriptions including requirements, functional specifications, and I&C system architecture descriptions.
  • Develops troubleshooting plans and failure mode analysis documents to support design reviews. 
  • Author factory acceptance test procedures.
  • Write guidance for instrument checking, calibration, and testing.
  • Develop instrument check, calibration, and testing program.
  • Participate in system Process Hazards Analysis.
  • Directly interfaces with other workgroups (e.g., System Engineering, Operations, Maintenance, Radiation Protection, Cyber Security).
  • Assists relevant teams in resolving I&C design issues.
  • Provide guidance, as a mentor, in the development of less experienced instrumentation and controls design engineers.
  • Lead reviews and presentations for internal company design reviews and customer design reviews regarding I&C design. 
  • Preparation and review of design change packages and design calculations (e.g., load flow, short circuit, protective device coordination, etc.) in accordance with company policies and procedures.
  • Assist Project management leadership in developing detailed schedules and resolving planning issues for I&C design activities.
  • Maintain professional demeanor and behavior at all times in all forms of communication. 
  • Perform other duties as assigned by manager.

Minimum Qualifications:
  • Bachelor’s degree in nuclear engineering, controls engineering, instrumentation, electrical engineering, electronic engineering, or electrical computer engineering, or related discipline from an accredited university or college.
  • Knowledge or experience in software engineering, software development, or utilization of a software development toolset.

Preferred Qualifications:
  • Master’s degree in engineering or related field (may include a combination of experience obtained through an academic institution, e.g., design projects, research, or design teams, as well as professional experience) may be in lieu of two years of experience.
  • Ph.D. in engineering or related field (may include a combination of experience obtained through an academic institution, e.g., design projects, research, or design teams, as well as professional experience) may be in lieu of three years of experience. 
  • Typically, five years of experience in an engineering role required.
  • Experience in application or development of software codes or standards.

Benefits:

All eligible employees enjoy an excellent benefits package, including medical/dental/vision insurance, short/long-term disability, life insurance, 401(k), paid time off including holidays, and tuition reimbursement.

EEO Statement:

MSTI is an equal-opportunity employer. All qualified candidates, including individuals with disabilities and protected veterans, are encouraged to apply. MSTI is an E-Verify employer. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: HR@mstechnology.com.

EEO Employer/Vet/Disabled

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*