Electrical/I&C Engineer

Oak Ridge, TN
Full Time
Mid Level
Summary
MS Technology, Inc. is seeking a motivated Electrical/I&C Engineer to support nuclear engineering and technology projects. The selected candidate will support the design, development, testing, and implementation of electrical and instrumentation & control (I&C) systems for complex nuclear and industrial facilities. The role includes responsibility for engineering deliverables, interfacing with clients and project teams, and ensuring compliance with industry standards.

Responsibilities
  • Design and develop electrical power systems, instrumentation, and control systems for DOE and commercial nuclear projects.
  • Provide engineering deliverables, including:
    • One-line diagrams, control schematics, wiring diagrams
    • Instrumentation and control logic diagrams
    • Equipment specifications and calculations (e.g., load flow, voltage drop, short circuit, arc flash)
    • Cable schedules and material take-offs
  • Perform power systems modeling and analysis using software tools like ETAP or SKM.
  • Ensure designs are compliant with NEC, IEEE, NFPA, ISA, and other applicable standards.
  • Participate in configuration management, technical reviews, and design verification.
  • Support construction, testing, startup, and troubleshooting activities as needed.
  • Interface with multidisciplinary teams including mechanical, structural, and systems engineering.
  • Assist with estimating and scheduling engineering efforts.
  • Mentor junior engineers, if in a senior role.

Minimum Qualifications:
  • Bachelor of Science in Electrical Engineering from an ABET accredited university
  • State of Tennessee Professional Engineer Licensure (or ability to obtain one)
  • Bachelor’s degree from a four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience (Entry-level positions).
  • Master’s degree or equivalent; or four to ten years related experience and/or training; or equivalent combination of education and experience (Mid-level positions).
  • Nuclear related design (NQA-1, NRTL, etc.)
  • Proficient knowledge of electrical distribution systems at various voltages (120 VAC, 480VAC, 4160VAC, and 13KV)
  • Experience with power analysis design software (ETAP, or SKM Power Tools)
  • Piping & Instrumentation (P&ID) interpretation
  • Capable with Instrumentation selection and datasheet preparation
  • Proficient at Control System Design (PLC, DCS) (Rockwell/Allen-Bradley, Siemens)
  • U.S. Citizenship.
  • Ability to obtain or maintain a DOE “Q” clearance (active clearance preferred).

Preferred Qualifications:
  • Professional Engineering (PE) license.
  • Experience with DOE or commercial nuclear facilities.
  • Proficiency with tools such as LabVIEW, MATLAB, PSPICE, OrCAD, Simulink.
  • Familiarity with industrial controls, embedded systems, and system integration.
  • Strong communication, technical writing, and teamwork skills.

Additional Skills
  • Excellent customer service and communications skills.
  • Ability to work both independently and as part of a team.
  • Ability to deal with conflicts and stressful situations.
  • Ability to organize, prioritize, and follow multiple projects and tasks to completion.
  • Microsoft Office Word, Excel, PowerPoint, SharePoint.

Benefits:

All eligible employees enjoy an excellent benefits package, including medical/dental/vision insurance, short/long-term disability, life insurance, 401(k), paid time off including holidays, and tuition reimbursement.

EEO Statement:

MSTI is an equal-opportunity employer. All qualified candidates, including individuals with disabilities and protected veterans, are encouraged to apply. MSTI is an E-Verify employer. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: HR@mstechnology.com.

EEO Employer/Vet/Disabled

Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*